Orders, contracts and milestones
Hourly projects: log hours, submit timesheets and get paid weekly
In short. How hourly work runs on Belancer: weekly funding, logging hours with notes and proof, Monday timesheets, client approval or questions, and weekly payment. It takes 6 steps: client: Fund the week; freelancer: Log hours as you go; freelancer: Submit the timesheet; client: Review the hours; freelancer: Answer a question.
Updated November 14, 20266 min read6 steps
- Freelancers
- Clients
- Agencies
On this page
On an hourly project, the client funds each week in advance up to the weekly limit (rate × hours). The freelancer logs hours as they work, with a note and proof, and submits a timesheet after the week ends. The client approves it or asks about specific hours. Approved hours are paid and anything unused goes back to the client.
Before you start
- The project must be accepted and the week funded. The card says Fund week 1 to start until it is.
- Weeks run Monday to Sunday, Dhaka time.
- Freelancers: keep proof as you work (screenshots, files, links).
Steps
1client: Fund the week
On the project page choose Fund week. The amount is your rate times the weekly limit. You can turn on automatic funding each Monday. If a week isn't funded, work pauses.
2freelancer: Log hours as you go
Choose Open timesheet and add an entry for each work session: date, start and end time (in quarter hours: type 09:00 and 11:30, or 9:00 am and 11:30 am; a time like 1:00 pm is turned into 13:00 when you leave the box), a note on what you did, and proof for longer entries. Entries can't overlap, must be at least 15 minutes, and the week total can't go over the limit.
3freelancer: Submit the timesheet
After Sunday sunday 23:59 Asia/Dhaka, the week closes. Your next step shows "Submit your hours" for that week. Check your entries and choose Submit timesheet.
4client: Review the hours
You see "Approve the hours" for the week, with every entry, note and proof. Choose Approve & pay, or Ask about these hours to question an entry. You have 5 days.
5freelancer: Answer a question
If the client asks about hours, you have 48 hours to choose Answer. You can explain or lower the hours. Only that week waits; other weeks continue.
6Get paid
Approved hours × rate are released to the freelancer's Pending balance (minus Belancer's fee of 10%) and become Available after 14 days. Unused money returns to the client.
What happens next
The next week starts on Monday. Repeat until the work is done, then either side chooses End project and both leave reviews. See end a project.
Two helpers on the timesheet
- Improve with AI (freelancer): under the note on a day, choose Improve with AI to get a clearer version of your rough note. It is only a suggestion: choose Use this to put it in the box, or Keep mine. Nothing is saved until you save the day. Only your note text is sent, with phone numbers, emails and links removed, and never your hours, your client or a screenshot. It works only when Belancer has switched AI writing help on, and there is a daily limit for each person.
- Worth a look (client): when you review a submitted week, a short list can point out things you may want to ask about, such as a very long day, the same note on many entries, work between midnight and 5 am, or a week much bigger than usual. It comes from simple rules, not AI, and it is only a hint: use Ask about these hours if something looks off. Friday and Saturday are never flagged, because many offices work on those days.
The Desktop Tracker
The Desktop Tracker is on for everyone. Until the app can be downloaded, nothing changes on your project screens. Once it can, a freelancer can record hours with the app instead of typing them. Tracked time appears in the same week with a Tracker label, counts toward the weekly limit like any other hours, and goes into the same timesheet. You can delete tracked time, but not change it.
- Client: once the app is available, an hourly project shows Time tracking, where you choose Allowed (the freelancer may track time or type hours in), Required (hours must come from the tracker) or Off (no tracker on this project).
- Freelancer: where tracking is Required, typing hours in is switched off. See your computers, and remove one you no longer use, in Settings > Security > Connected computers.
- Friday and Saturday work like any other day, so you can track on weekends.
Troubleshooting
- "Limit reached." You've logged the weekly limit. Ask the client to propose a higher limit for future weeks.
- I missed the Sunday deadline. Entries lock when the week closes. Talk to the client; time you didn't log can't be added later.
- Proof is required. Add files or links for entries longer than 120 minutes.
- A proof file didn't upload. It shows in red under the day, and Save is refused until you remove it or add it again, so an entry is never saved without the proof you picked.
- "Start time: use 15-minute steps". Times must end in 00, 15, 30 or 45, so 9:10 is refused; write 09:15 instead. The message names the box (start or end) and that box turns red as soon as you leave it.
- The Save button is grey. There is nothing to save for that day yet. It turns dark as soon as you change a time, a note or the proof.
- The week isn't funded. Freelancers: don't work until it is. Clients: fund the week from the project page.
- We can't agree on hours. Use Report a problem on that week. Only that week's money is frozen.
Good to know
- Maximum per day: one day's entries can't exceed 720 minutes.
- Rate changes use Propose a new rate or limit and apply from the next week once accepted.
- Refunds only ever cover that week's unused or disputed money.
Tip: Write notes a client can understand without asking: "Built the login page and fixed two form bugs" is better than "Coding".
Note: Hours are logged by hand with notes and proof. Each entry shows exactly what the client is paying for.
Questions and answers
When does an hourly week start and end?
Weeks run Monday to Sunday, Dhaka time. Log your hours by sunday 23:59 Asia/Dhaka; the timesheet is due monday 12:00 Asia/Dhaka.
How long does the client have to approve?
5 days. If they don't act, the timesheet is approved automatically and the freelancer is paid.
Do I need proof for my hours?
Every entry needs a note. Entries longer than 120 minutes also need proof, such as files or links.
Can I work more than the weekly limit?
No. You can't log more hours than the project's weekly limit, and the client never pays for more.
What happens to money the client funded but didn't use?
Unused money for that week goes back to the client's Belancer Balance after the timesheet is settled.
Can the rate change?
Either side can propose a new rate or weekly limit. It applies to future weeks only, after the other side accepts.
Was this guide helpful?
Related guides
- Hiring on BelancerHow to end a project on BelancerEnd a fixed-price or hourly project when the work is done or no longer needed. See what happens to funded, submitted and unfunded work, and to reviews.
- Fees, credits and documentsBelancer fees: what freelancers and clients payBelancer's fees in plain words: the freelancer fee on each service, the client service fee by currency, withdrawal fees and how fees are locked on each order.
- Orders, contracts and milestonesAsk for more time, offer an extra or ask a question during an orderDuring a gig order, sellers can ask a clarifying question (clock pauses), request more time, or offer a paid extra. Nothing changes until the buyer says yes.
- Orders, contracts and milestonesHow to cancel an order on Belancer (and get a refund)Cancel instantly when an order is late or before requirements, or ask the other side to cancel. See what happens to the money and when Belancer reviews it.
Still stuck?
Talk to a real person, in Bangla or English.
Live chat opens soon. Send us a message instead.